Suunto Forum by SuuntoWatches.com
This is a discussion on Problem installing bike pod within the Suunto t Series forums; Hi all, I've just bought the Suunto cycling pack , with T3 watch, bike pod and HR pod . I'm ...
| |||||||
| Register | FAQ | Members List | Search | Today's Posts | Mark Forums Read |
| |||
| Problem installing bike pod Hi all, I've just bought the Suunto cycling pack, with T3 watch, bike pod and HR pod. I'm currently trying to attach the bike pod to my Gary Fisher 2007 X Caliber and I'm struggling. Does anyone have any pictures of the pod attached to their bike? It's this pod. I'm trying to attach the cable ties, but can't make head nor tail of the instructions, and as I've only got 3 cables to play with, I don't want to experiment... I've searched the forums but to no avail. Thanks Nick |
| |||
| Ok, I've fixed that problem myself. Well, I phoned my brother... Next problem is calibration. It says to find the circumference of the wheel in millimetres, then divide by 2050, then gives the example 2096/2050 = 1.02243 = 1.022. It says to go to the calibration settings and select this value with the up and down buttons. However, my t3 only has numbers to 2 decimal places. Also, it goes from 0.01 to 65.34 or something like that. Now, unless someone in the circus has bought one, 65.34 is never going to be used if a standard wheel comes out at around 1.022. I inputted my figure anyway, which was 1.040, and span the wheel. I was greeted with speeds between 90 and 200 miles per hour. Now thoroughly confused. Nick |
![]() |
| Thread Tools | |
| Display Modes | Rate This Thread |
|
|
| ||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Problem calibrating bike pod with t6 c | horstl | Suunto t Series | 0 | 07-06-2008 06:51 AM |
| T3 + Bike Pod | lebow | Suunto t Series | 2 | 05-02-2008 05:34 AM |
| T6-Road Bike Pod with T6 | Fredman | Suunto t Series | 0 | 08-12-2007 03:36 AM |
| Bike pod doesn't fit. | Bill M. | Suunto 6 Series | 3 | 06-15-2005 06:07 PM |