T6 Training Manager 2.2.0 Graph

[kaimok]

Hi!

After training I downloaded data from the T6 to my computer. I can see (Graph window -> Analyze)
Duration
Start time
End time
Max HR
Min HR
Avg HR
T.Effect
(these all have some values)

But when I switch to Graph window -> Graph and just select HR, it has constant line, having the value 0 bpm. Why it is so? T6 has managed to get my min. and max. heart rate, average but why it does'n show my HR throughout the training on the graph?

	Suunto t6 - Click for more info The Suunto t6 is one of the most exciting new personal training devices to hit the health and fitness market this year. The "t" in t6 (if you don't want to get too technical) stands for "training". It actually refers to the time interval between two heartbeats, or EPOC. Measured to the millisecond, this interval allows you (using the included PC software) to assess your current fitness, set a proper training load, measure your actual fitness gain over time, and achieve your overall fitness goals.

	Suunto Training Effect watches - Click for more info More than a heart rate monitor, Suunto's exclusive Training Effect feature tells you whether you're training too little, too hard or staying within the zones for optimal improvement.

[kaimok]

T6 manual states often: "If you adjust the settings after activating the stopwatch, Suunto t6 will still use the old settings." That was the problem. I activated 1st the stopwatch, then paused it (pressed START/STOP), connected the chest belt and then activated the stopwatch (pressed START/STOP).

T6 manual, page 59:

4.2. TRAINING EXAMPLE
Example: Rita Runner
[...]
She puts on her HR transmitter belt, making sure the strap fits snugly, and checks that the electrodes are moistened. By long pressing ALT/BACK in the Training or SDP/DST mode, she connects the heart rate transmitter belt with her Suunto t6. In the Training or SPD/DST mode, she checks the stopwatch and resets it by long pressing the UP/LAP button. After that, she presses the START/STOP button which activates the stopwatch and interval timer, at which point she begins her training. The heart rate limits alert her during her training, whenever her heart rate is too slow
---

So:
1. connect the chest belt with T6
2. reset the stopwatch
3. activate the stopwatch

What I did was: 2-3-1

	Suunto Visit SuuntoWatches.com to see Suunto's full line of wrist top computers and compasses.

	Suunto t6 - Click for more info The Suunto t6 is one of the most exciting new personal training devices to hit the health and fitness market this year. The "t" in t6 (if you don't want to get too technical) stands for "training". It actually refers to the time interval between two heartbeats, or EPOC. Measured to the millisecond, this interval allows you (using the included PC software) to assess your current fitness, set a proper training load, measure your actual fitness gain over time, and achieve your overall fitness goals.

	Suunto Training Effect watches - Click for more info More than a heart rate monitor, Suunto's exclusive Training Effect feature tells you whether you're training too little, too hard or staying within the zones for optimal improvement.

	Suunto Bands - Click for more info The range of Suunto Core Acessory Straps include the six straps as found on the various Suunto Core wristop computer models as well as three additional straps. All straps are compatible with every Core model, allowing you to custom-tailor your Core to your tastes and needs.